Operation; Meaning Of Functions - Bien-Air Dental OPTIMA INT Guide Utilisateur

OPTIMA INT

Operation

Meaning of functions

Bien-Air Dental
OPTIMA INT
The 'reverse rotation' function can be selected directly from all programs in the mode
REV
Operative.
If selected, an audible signal indicates reverse rotation.
For Endo setting must be carried out in SETUP (Auto-forward/Auto-reverse).
SAVE
There are two ways of saving program settings:
- Hold down button,
values are memorised directly
- Short press on the button and the following screen appears:
Save -> values are memorised directly
Save as (10 left) -> save values under a new name
Rename -> change the name of a program (as above)
Delete -> delete a program
Progr. listing -> Change the order of programs
ESC
BACK function. «ESC» makes you leave current screen.
If the display flashes when leaving, changes will NOT be recorded.
The changes must always be confirmed using «SAVE», otherwise they will be lost.
(up to 10 programs)
Enter a new name:
with the alphabet appears
with move cursor left or right
with «REV» delete letters
with «SETUP» insert letters
with select a program
with «OK» confirm (the selection flashes)
with move the program to desired position
REV
'Reverse rotation'
of motor function
SAVE
Save settings
ESC
'Back' function
SETUP
Change configuration
29