Cleaning And Routine Maintenance; Cleaning The Dryer; Technical Specifications - Candy GO DV 38 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

40005084Eng.qxd
04/07/2007
When the function is first selected the display will
show a delay of 6 hours, a subsequent press of
the button will increase the delay to 9 hours.
To commence the programme press Départ and
the appliance will complete the drying cycle at
the end of this time. The 6 or 9 hour indicator
light will flash to indicate that the start delay is in
progress.
Cleaning and Routine
Maintenance

Cleaning the dryer

Clean the filter after every drying cycle.
After each period of use, wipe the inside of
the drum and leave the door open for a
while to allow circulation of air to dry it.
Wipe the outside of the machine and the
door with a soft cloth.
DO NOT use abrasive pads or cleaning
agents.
To prevent the door sticking or the build up
of fluff periodically clean the inner door and
gasket with a damp cloth.

Technical specifications

Drum capacity
Maximum load
Height
Width
Depth
Energy Label Band
11:01
Page 15
115 litres
8 kg
85cm
60cm
60cm
C
IMPORTANT
Always switch
off and remove
the plug from
the electricity
supply before
cleaning this
appliance.
For electrical data
refer to the
rating label on
the front of the
dryer cabinet
(with the door
open).
15

Publicité

Chapitres

Table des Matières
loading

Table des Matières