White-Westinghouse CAMO Tout À Propos De L'utilisation Et L'entretien page 5

anchored into the appliance wall (located
in the back only). Be sure to keep the
larger end of the shelf grommets away
from the wall.
6. Push the shelf grommets onto the shelf
rod until firmly seated.
7. Slide the shelf grommets into the wall
grommets already in the unit wall until
they are flush.
8. Guide the support-hanging basket
underneath the shelf, inserting the
slotted end of the support onto the rear
shelf rod.
9. Rotate the support-hanging basket up
to bring the front end over the front
shelf rod. Slide forward to locate front
of support-hanging basket over front of
shelf rod. Push down on support until it
snaps into place.
To install the handle clips to the basket:
1. Place the basket on a firm, flat surface.
2. With the narrow side of the handle clip on
the inside of the basket, snap the handle
clip to the recessed area in the basket.
3. Once the inside surface snaps in place,
continue the process by rolling the
handle clip slightly outward and pressing
down firmly to snap onto the outside
surface. If installed incorrectly, the
handle clip will not lay flat.
FIRST STEPS
5