Technical Specifications - GEZE GC 334 Manuel D'utilisation

Masquer les pouces Voir aussi pour GC 334:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
PLEASE KEEP FOR FURTHER USE
DESIGNED FOR COLOUR PRINTING
DRAFT
DESCRIPTION
The GC334 is a safety sensor for automatic swing doors based on active infrared technology. It secures the area in front of
the moving door leaf. To do so, modules must be installed on the top rail of the door leaf.
1
2
3
4
5
6

TECHNICAL SPECIFICATIONS

Technology:
Detection field:
Mounting height:
Reaction time:
Max. presence time:
Supply voltage:
Max current consumption:
Output:
Max. contact voltage
Max. contact current
Max. switching power
Input:
Max. contact voltage:
Voltage threshold:
Max. number of modules:
Reflectivity:
Degree of protection:
Temperature range:
Expected lifetime:
Conformity:
1.
profile
2.
supporting clip
3.
main connector
4.
DIP-switch
5.
calibration screw
6.
receiver
active infrared with background suppression
400 mm (W) x 70 mm (D) (at 2 m mounting height; 4 spots active)
1.3 m to 3.5 m
64 ms (typ)
infinite
12 V - 24 V AC +/-10% ; 12 V - 30 V DC -5%/+10%
(to be operated from SELV compatible power supplies only)
95 mA @ 24 V AC/ 70 mA @ 24 V DC; 170 mA @ 12 V AC/ 130 mA @ 12 V DC (MASTER)
85 mA @ 24 V AC/ 60 mA @ 24 V DC; 180 mA @ 12 V AC/ 113 mA @ 12 V DC (other modules)
2 relays (free of potential contact)
42 V AC/DC
1 A (resistive)
30 W (DC) / 42 VA (AC)
1 optocoupler (free of potential contact)
30 V
high: >10 V DC; low: <1 V DC
4 (up to 6 if 24 V DC)
min. 5% at IR-wavelength of 850 nm
IP54
-25 °C to +55 °C; 0-95% relative humidity, non condensing
20 years
DIN 18650-1 ch. 5.7.4; EN 16005 ch. 4.6.8;
EN 12978; IEC/EN 61508 (SIL2)
EN ISO 13849-1 Performance Level «c» CAT. 2
(under the condition that the door control system monitors the sensor at least once per door cycle)
GC 334
SAFETY SENSOR
FOR AUTOMATIC SWING DOORS
User's Guide for product version 0500 and higher
See product label for serial number
7.
end cap
8.
clip with angle adjustment screw
9.
transmitter (TX)
10.
push button
11.
front face
Specifications are subject to changes without prior notice.
All values measured in specific conditions.
7
8
9
10
11

Publicité

Table des Matières
loading

Table des Matières