Wisi VS 35 PRO Notice D'utilisation page 11

VHF / UHF Inputs
VHF
Ex : Choose UHF 1
DC: OFF
Add channel without conversion (selection in the main menu)
Add channel
Add channel with conversion (selection in the main menu)
Add channel
*Nota: Some TV sets present difficulties to tune converted channels in VHF (band III)
For EU, Italy and New-Zealand region, Channel 13 (230 – 240 MHz) can be used
CH 13 cannot be converted
UHF 1
DC
OFF
Add channel
21 : 21 | 56
Add channel
21 : 25 | 50
21 : 25 | 56
27 : 27 | 62
Channel
- -
Channel deleted
Add channel
41: 41 -> 44: 44 | 68
56dBµV
Add channel
41: 45 -> 44: 48 | 50
- 11 -
UHF 2
➢ Remote power supply voltage
➢ Selection between OFF or 24 VDC
and the default voltage (or chosen 12 VDC
in the Advanced menu)
Add a channel
Select the channels. Up to 6 channels
can be added at once, from 8 to 48 MHz
per cluster. The selectivity to the right
and to the left of the cluster is
maintained. Input level is indicated in the
right corner of the display.
The value of the right side of the
display, is the HF level from the
selected channel
➢ To delete a channel
➢ Select the channel to be removed
➢ Turn its value to - - or 0
(depending on software version) to
confirm
➢ Channel deleted
➢ Add channel
Select the channel(s) to be converted. Up to
6 channels can be added at once
➢ Select the channel of destination
The channels can be converted from
and to the UHF and VHF* bands