Advanced - Wisi VS 35 PRO Notice D'utilisation

Advanced

Advanced
Language
Region
DC Voltage: 24V
BW
Serial number
Software
Reset
Notes:
The selection of the region ( UK, USA, Australia ...) sets the channel
frequency plan and the default remote power supply (12 or 24V).
➢ Select the voltage corresponding to your use in the DC voltage menu
After reset, the default country is Europe.
➢ Select English, Français, España
Language
English
Region
EU (Default)
➢ Select 12 or 24 V
DC Voltage
➢ This voltage is set for all inputs. It's not
24V
➢ 12 et 24V sur différentes entrées.
➢ The filter bandwidth (BW) can be changed
BW
- 500kHz
Serial number
xxxxxxxxxxxxxx
V. xxxxxxxxxxx
➢ Reset to default
Reset
Confirm
Reset done
Region
Region
Europe (Default)
- 10 -
➢ Indicates the region. To choose another
region, go to Reset (see below)
possible to get 12 and 24V on different
inputs
from -2000 kHz to 0 kHz in steps of 250
kHz.
This allows you to optimize the bandwidth
of your filter.
For instance, a European 8 MHz channel
can be changed from 6 to 8 MHz. The
factory setting is -500 kHz.
➢ Indicates the serial number
➢ Indicates software version
➢ Reset done
➢ Region selection
➢ Default Europe
(European channel
frequency plan and
DC 24V)
► Choose between
Australia, Brazil, China,
Hong Kong, Italy, New-
Zealand, Russia, South
Africa, UK, USA