Fujitsu LIFEBOOK S762 Guide D'utilisation page 174

Table des Matières

Publicité

Basic Enrollment
The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after
OmniPass installation the Enrollment Wizard will launch on Windows login. If you do not see the Enrollment Wizard,
you can bring it up by clicking Start on the Windows taskbar; select Programs; select Softex; click OmniPass Control
Center.
Click Run Enrollment Wizard.
1
Click [Create and Enroll a new Windows user].
2
Follow the instructions as directed by the Wizard.
3
Enrolling a Fingerprint
Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure.
You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click the system tray
OmniPass icon. Select the User Settings tab and click Enrollment under the User Settings area. Click Enroll
Authentication Device and authenticate at the authentication prompt to start device enrollment.
During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have
1
already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked
by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled
and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to
enroll and click [Next].
It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before
2
OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen
times out, click [Back] to restart the fingerprint enrollment process.
Your system has a "swipe" fingerprint sensor. A swipe sensor is small and resembles a skinny elongated rectangle.
To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second knuckle)
towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger screen has a
[Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how your
fingerprint is captured, proceed to enroll a finger.
168 - Introducing the Optional Fingerprint Sensor Device

Publicité

Chapitres

Table des Matières
loading

Table des Matières