Section 10: Internal Fuse Ratings; Section 12: Specifications - SamplexPower SEC-1280UL Mode D'emploi

seCtIOn 10 |
Both the AC input side and DC output side have fuses.
The AC input side fuse is located on the PCB F1 inside the unit. It is rated at 250V, 20A,
Time Delay (Size 6.3 mm x 32 mm, pig-tail).
The DC side fuses are located inside the unit. To access these fuses, remove the top cover.
These are automotive blade fuses (for example, "Littelfuse" Type ATO) rated as follows:
SEC-1280UL
SEC-2440UL
seCtIOn 11 |
PARAMeteR
NOMINAL INPUT VOLTAGE
By changing internal jumper
INPUT CURRENT
OUTPUT VOLTAGE
Absorption "Uo Phase"*
MAxIMUM BULK
CHARGING CURRENT, I
THRESHOLD OF CURRENT FOR
CHANGE OVER ABSORPTION
From Float "U" to Absorption "U
From Absorption "U
DURATION OF ABSORPTION /
MAxIMUM BATTERY CAPACITY
TEMPERATURE COMPENSATION
28 | SAMLEX AMERICA INC.
Internal Fuse ratings
3 pieces, each rated at 32V, 30A
3 pieces, each rated at 32V, 15A
specifications
Factory Preset
At 120 VAC input
At 230 VAC input
Bulk "I Phase"
Float "U Phase"*
Normal Operation
Half Power Mode
"
o
" to Float "U"
o
BOOST STAGE
Sec-1280UL
120 VAC, 50 /60 Hz
(108 to 132 VAC)
230 VAC, 50 / 60 Hz
(207 to 253 VAC)
15.9A
8.6A
13.5V +/-0.05V
14V / 14.4V +/-0.05V
13.5V +/- 0.05V
80A
40A +/-1A
15A +/-1A
8A +/-0.5A
4 Hrs or 8 Hrs
(Switch selectable)
800 Ah
YES, with Temperature Sensor TF-500
Sec-2440UL
15.3A
8.3A
27.0V +/- 0.05V
28V / 28.8V +/- 0.05V
27.0V +/- 0.05V
40A
20A +/- 1A
8A +/-1A
4A +/-0.5A
400 Ah