Basic Connection - LG 32LC2D Mode D'emploi

Basic Connection

Basic Connection
How to use stand (For 42PC1D**, 42PC3D**)
Place the set with the screen facing down on
1
a cushion or soft cloth as shown.
Before unfolding the stand, please make sure
two locks (A) on the bottom of the stand push
outward.
When connecting cables to the set, Do not
3
disengage the lock (C).
This may cause the set to fall, causing serious
bodily injury and serious damage to the set.
How to arrange the cable (For 50PC3D**)
1 Hold the CABLE MANAGEMENT with both
hands and push it as shown.
3 Reinstall the CABLE MANAGEMENT as
shown.
2
(A)
* Image shown here may be slightly different from
When closing the stand for storage
- First remove the screws in the holes (B) on the bottom
(C)
- After folding, push the two Locks (A) of the stand
2
Pull the stand out as shown.
After unfolding the stand, please insert and
tighten the screws (provided as parts of the
product) in the holes (B) on the bottom of the
stand.
your set.
of the stand. And then pull two Hooks (D) of the stand
bottom and fold the stand into the back of the set.
bottom outward.
Connect the cables as necessary.
To connect an additional equipment, see the
External equipment Connections section.
For 42PC1D**, 42PC3D**
Arrange the cable as shown.
Installation
(B)
(A)
(B)
(D)
19