Important Information; De - Beschreibung - Window Master WUF 150 Notice D'installation

1.4 Important information

•
Only genuine 24 V WindowMaster actuators should be connected.
•
WUF 150 is a class I product and must be connected according to the rules for its class.
•
The WUF 150 must not be covered (maximum casing temperature: 50°C). Should not be exposed directly
to the sun.
•
For indoor use only.
•
The surface should be cleaned with a soft damp cloth using a small amount of household cleaner diluted
in water.
•
The motor interface is to be installed by a certified electrician according to the current electrical
regulations.
•
Before installation and removal of motor interface WUF 150 disconnect from the mains supply. Ensure
that the motor interface cannot be connected unintentionally.
•
Never put a hand or the like out of the window before the system is disconnected form supply voltage.
•
The packaging can be disposed of together with ordinary household waste.
•
Electrical products must be disposed of in conformity with national regulations for electronic waste and
not with usual household waste.
•
In case of technical problems, please contact WindowMaster.
2 DE – Beschreibung
Das WUF 150 ist ein Antriebinterface, das 230 VAC Betrieb von WindowMaster 24VDC Antriebe ermöglicht. Eine
Leitung zum Öffnen und eine Leitung zum Schließen des Fensters. Das WUF 150 darf nur an original
WindowMaster Fensterantriebe mit einer max. Gesamtstromaufnahme von 5A angeschlossen werden.
WUF 150 öffnet das Fenster
150 schließt das Fenster
WUF
6