Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Important information
•
Only genuine 24 VDC WindowMaster actuators with MotorLink
•
The WIC 01M must not be covered (maximum casing temperature 50°C).
•
WIC 01M is a class 2 product.
•
For indoor use only.
•
Before commencing any maintenance/service disconnect from mains supply.
•
The package can be disposed together with ordinary household waste.
•
It is recommended that the WIC 01M is not placed in dusty surroundings.
•
It is recommended to place a remote control in the room where the window and controller is placed.
•
Only connect io-homecontrol
•
RF-band: 868MHz.
•
RF reach: 300m in free field. Indoor the reach is limited to approximately 30m.
Description
WIC 01M is a control-unit that is used for controlling 24 VDC window openers with MotorLink
®
homecontrol
sun screen products, with a total simultaneous current consumption of max 1A. WIC 01M has one set of
terminals for the connection of actuator cable (0V, 24V and communication) and two powerlink terminals for the
connection of various types of io-homecontrol
possible to connect a rain sensor.
The WIC 01M carries the io-homecontrol
It is recommended to use the remote control KLR 200 from VELUX to control the WIC 01M.
The preliminary setup of the WIC 01M is described in this manual, for configuration with the KLR 200, please see refer to
its instruction manual.
Sunscreening
product
®
compatible products to the sun screen terminals.
®
sun screening products from VELUX or VELFAC. In addition, it is
®
label. That means that it is compatible with other io-homecontrol
Window motor
®
can be connected, see product sheet.
WIC 01M
230V – 50Hz
3
®
and various io-
®
products.
Rain sensor
Publicité
Table des Matières
