Use Of The Control Panel; Operating Parameters; Changing The Power; Changing The Ventilation - Royal DORA AIR Notice D'installation Et D'entretien

11.2 Use of the control panel

• Use the arrow keys to move between the various menus that light up from time to time.
• Hover over a specific function and press the
• Pressing the key
• In general, all flashing values can be changed using the
• The "cancel" key discards the change; if it is pressed and held down, any alarm code or error
will be displayed on the screen.

11.3 Operating parameters

Functioning of the stove is determined by the Power, Ventilation and Temperature parameters set
by the user.

11.3.1 Changing the power

The power defines the quantity of heat produced by the stove and therefore also directly affects
consumption.
To change the power:
a) Use the keys on the power menu
b) The power value will flash; change the value with the
c) Press the key to confirm the data set.

11.3.2 Changing the ventilation

To change the value of the ventilation:
a) Use the keys on the ventilation menu
b) Set with the keys
• "1" minimum,...,"5" maximum;
• "A" = automatic operation (the stove will set the speed according to the room temperature;
• "Hi" = ultra-fast operation (to be used only if there is a need to quickly heat an environment);
c) Press the key to confirm the data entered.
11.3.3 Changing the room temperature
By changing this value, the desired room temperature is set which is read directly by a probe located
on the stove.
To modify the desired temperature value:
a) Move with the keys
b) The current value will flash; modify it with the
c) Press the key to confirm the set data.
84
again confirms the change.
and press the
and one of the following values:
to the temperature menu
key to change the values with the
keys.
key;
keys (1 minimum,...,5 maximum);
and press the key;
and press the key
keys;
keys.
;
004778391 - 23/09/2021