Power Management Function - ARTHUR MARTIN AIH633BK Notice D'utilisation

10
To override the function for only one
cooking time: activate the hob with
comes on. Touch
the heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with the function operates again.
Power limitation
Originally the hob is at its highest possible
power level.
To decrease or increase the power
level:
1. Deactivate the hob.
2. Touch
for 3 seconds. The display
comes on and goes off.
3. Touch for 3 seconds. P0 to P9
comes on.
4. Touch of front left zone to set the
power level.
Power levels
Refer to "Technical information" chapter.
• P0 — 7200 W
• P1 — 1500 W
• P2 — 2000 W
• P3 — 2500 W
• P4 — 3000 W
• P5 — 3500 W
• P6 — 4000 W
• P7 — 4500 W
• P8 — 5000 W
• P9 — 6000 W
CAUTION! Make sure that the
selected power fits to the house
installation fuses.

Power management function

• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
.
for 4 seconds. Set
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones changes between two levels.
Power management function with
Power limitation function
When you set the Power limitation function
to 4.5 kW or less, power of the hob is
divided between all cooking zones.
When you set the Power limitation function
to more than 4.5 kW, power of the hob is
divided between two cooking zones in a
pair.