Reflecta x10-Scan Mode D'emploi page 38

8. Watching the images on a TV screen
EN
Connect your scanner and TV set by the TV Cable. Set
your TV to video mode, turn on the power of the scanner
and press the (Playback) Button, select the TV system
of the country you locate, then press the OK/( ) Button
to confirm the system you select. You are now allowing to
watch your image on the TV screen.
You may also connect the scanner to TV set via USB
setting, to watch up to a 4K/2K image quality, depending
on the maximum resolution of your TV set.
For proper USB connection of your TV set please refer to
the instruction manual of your TV set, and treat your USB
and scanner connection as a Card Reader.
-15-