Reflecta x10-Scan Mode D'emploi page 35

2. Scanning type 135, 110 and 126 negative films:
Insert the 135 (110/126) negative holder into the
scanner's holder slot according to the triangular mark
on the scanner and the holder, as shown in below
diagram. Turn on the power of the scanner, select the
type of film to be scanned by pressing the Film Type
Button. You may keep the film image in position by
referring the image shown in the LCD screen. Press
the Film Type Button to select the proper type of film
for scanning. Press the OK/(
the image is saved into the SD Card automatically.
Note: 110 and 126 Film Holders are optional parts, not
included in the scope of delivery.
) button to scan image,
-12-
EN