Reflecta x10-Scan Mode D'emploi page 34

. Place Slide / Film Holder Into The Scanner
5
The Scanner supports 50X50mm transparent slide,
135 B&W, and 135/110/126 negative film.
1. Scanning 50X50mm Transparent (Positive)Slide:
Insert the 135 Slide Holder into the scanner Film/Slide
Holder Slot according to the triangular mark on the
scanner and the holder, as shown in below diagram.
You may keep the slide in position by referring the
image shown in the LCD screen. Press the Film Type
Button to select the proper type of film for scanning.
Press the OK/(
saved into the SD Card automatically.
) button to scan image, the image is
-11-
EN