Dishwasher Cycles And Options; Wash Cycle Options - Bosch SuperSilence Plus 39dBA SHE9PT55UC Guide D'utilisation

Dishwasher Cycles and Options

Wash Cycles
Note: In order to save energy, it is recommended to set the "Auto Power Off" feature (available on select mod-
els) to "P:01" (see the "Auto Power Off" section of this manual).
Heavy: Best for cleaning items with baked-on food or grease. These dishes would normally require soaking.
Auto: Our smartest cycle, with our most flexible soil sensing capability, this cycle is optimal for use with mixed
dishware and food soils.
Glass: A cycle for lightly soiled dishes, ideal for temperature sensitive items or cutlery. In this cycle the temperature
is reduced to help prevent dishes from becoming damaged. It is especially helpful to reduce a cloudy or etched
appearance on glasses.
Note: Some glasses are more prone to etching due to glass manufacturing processes.
Normal: The Normal cycle is recommended for daily, regular, or typical use to completely wash a full load of nor-
mally soiled dishes.
In order to obtain optimal performance with minimum energy consumption, it is recommended to disable all available features
except Auto Power Off as noted at the start of this section.
Note 1: See footnote for additional energy test setup instructions.
Express: Cleans lightly soiled dishes and reduces overall wash time. Use this cycle to clean glasses and
dessert dishware that may need to be reused at the same event.
Rinse: Allows you to rinse food soil off of a partial load and hold the dishes in the dishwasher until you are
ready to run a full load. Do not use detergent in this cycle.

Wash Cycle Options

Delay: Allows you to delay the start time of your dishwasher up to 24 hours.
SpeedPerfect™: The SpeedPerfect™ option is available with Heavy, Auto, Eco and Normal cycles.
Half Load: The Half Load option can reduce the energy and water consumption when washing small, lightly
soiled loads that fill approximately half of the dishwasher's capacity.
Delicate: The Delicate option is available only in the Heavy, Auto and Normal cycles. This cycle is best used for
lightly soiled items with easy to remove food soils.
Sanitize: The Sanitize feature is available only in the Heavy, Auto and Normal cycles. Select one of these cycles,
press the "Sanitize Option" button and then press Start to activate the Sanitation features. The sanitize LED will
light when sanitation requirements are met. The technical sanitation measures may also improve the drying results.
Note: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize
option in your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it
on.
Note 1: The Energy Guide label was based on the Normal or Regular soil sensing cycle as follows: The unit was tested without any Rinse Aid (liquid)
in the Rinse Aid chamber. A single dose of detergent was inserted into the Detergent Dispenser, with no detergent being used in the prewash. The
unit was not subjected to truncated testing per the definitions in the test procedure. We recommend that dish loads such as the one in the energy
certification test have the rack position set in the highest position.
11