Philips S95 Série Mode D'emploi page 37

Problem
I replaced the
shaving heads, but
the replacement
reminder is still
showing.
A shaving head
symbol has
suddenly appeared
on the display.
An exclamation
mark has suddenly
appeared on
the display while
charging.
An exclamation
mark, replacement
reminder and the
cleaning reminder
have suddenly
appeared on the
display.
Water is leaking
from the
bottom of the
shaver.
The SmartClean
system does not
work when I press
the on/off button.
Possible cause
You have not reset
the shaver.
This symbol is
a replacement
reminder.
The shaver is
overheated.
The shaving heads
are soiled or
damaged.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
The SmartClean
system is not
connected to the
mains.
ENGLISH
Solution
Reset the shaver by pressing
the on/off button for
approx. 7 seconds (see
chapter 'Replacement').
Replace the shaving heads
(see chapter 'Replacement').
Disconnect the shaver from
the mains for approx.
10 minutes.
Replace (see chapter
'Replacement') or clean the
shaving heads (see chapter
'Cleaning and maintenance').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
37