Philips S95 Série Mode D'emploi page 36

ENGLISH
36
Problem
The shaver does
not work when I
press the on/off
button.
The shaver does
not shave as well
as it used to.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/
support for a list of frequently asked questions or
contact the Consumer Care Centre in your country.
Possible cause
The shaver it still
attached to the mains.
For safety reasons,
the shaver can only
be used cordlessly.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
Solution
Unplug the shaver and press
the on/off button to switch
on the shaver.
Recharge the battery (see
chapter 'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads
(see chapter 'Cleaning and
maintenance').
Clean the shaver thoroughly
before you continue shaving
(see chapter 'Cleaning and
maintenance').