Your Router Was Not Successfully Set Up; Windows Xp Service Pack Update - Linksys XAC Série Mode D'emploi

Linksys XAC-Series Linksys XAC-Series
Troubleshooting
This chapter can help you solve common setup issues and connect to the
Internet You can find more help from our award-winning customer support at
linksys.com/support.

Your router was not successfully set up

If Linksys Smart Wi-Fi did not complete setup, try the following:
Press and hold the Reset button with a paperclip or pin until the LED starts
blinking )about 10 seconds( Install the router again
• Temporarily disable your computer's firewall )see the security software's
instructions for help(, and install the router again
If you have another computer, use that computer to install the router
•
again

Windows XP Service Pack update

On Windows XP computers, Linksys Smart Wi-Fi requires Service Pack 3 If the
currently installed Service Pack is older than version 3, you need to download
and install Service Pack 3
TIP
To temporarily connect to the Internet and download the required
Service Pack, use the included Ethernet cable to connect your
computer directly to your modem
To install Service Pack 3:
1. Connect to the Microsoft Update website
windowsupdate(
2. Follow the instructions on the website or contact Microsoft if you need
further help
3. After downloading and installing Service Pack 3, install the router again
Troubleshooting
)update.microsoft.com/
9 9 9