General Information; Warranty And Liability - SATA air vision 5000 System Mode D'emploi

Masquer les pouces Voir aussi pour air vision 5000 System:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
Operating instructions SATA air vision 5000 system
EN
tection equipment.

1. General information

The SATA air vision 5000 System, hereinafter breathing protection equip-
ment, supplies the user with clean air for breathing. Furthermore, the
breathing protection equipment protects the user from breathing contami-
nated air.
The breathing protection equipment can be made up of different com-
ponents to obtain various breathing protection apparatuses in differing
versions.
The system description refers to using the components in a breathing
protection apparatus.
Information about operation, handling, care, maintenance, cleaning, warn-
ings and error messages together with troubleshooting for the individual
components can be found in each particular set of operating instructions.
1.1. Target group
This system description is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.2. Accident prevention
As a basic principle, the general and specific national accident prevention 
regulations must be heeded, together with corresponding workshop and
industrial safety instructions. Users of breathing protection units need a
medical examination to ensure their suitability. In Germany, this is subject
to the "guidelines on the principles for preventive medical check-ups in
the workplace, G 26: users of breathing protection units for work and res-
cue". Furthermore, due consideration must be given to the pertinent regu-
lations as per breathing protection leaflet DGUV rules 112-190.
1.3. Replacement, accessory and wear-and-tear parts
In principle, only original replacement, accessory and wear-and-tear parts
from SATA are to be used. Accessories that were not delivered by SATA
are not tested and not approved. SATA assumes no liability whatsoever
for damages incurred due to the use of unapproved replacement, acces-
sory and wear-and-tear parts.

1.4. Warranty and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
38

Publicité

Table des Matières
loading

Table des Matières