Brush Heads - Braun Oral-B SMART Teen Mode D'emploi

• The green charge indicator light (e) flashes while the handle is being
charged. Once it is fully charged, the light turns off. A full charge
typically takes 12 hours and enables at least 2 weeks of regular
brushing (twice a day, 2 minutes) (picture 1).
Note: After deep discharge, the charge indicator light might not
flash immediately; it can take up to 30 minutes.
• If the battery is running low, the red charge indicator light (f) is
flashing for a few seconds when turning your toothbrush on/off and
the motor is reducing its speed. Once the battery is empty, the
motor will stop; it will need at least a 30-minute charge for one
usage.
• You can always store the handle on the plugged-in charging unit to
maintain it at full power; a battery overcharge is prevented by
device.
Note: Store handle at room temperature for optimal battery
maintenance.
Caution: Do not expose handle to temperatures higher than 50 °C.
Using your toothbrush
Brushing technique
Wet brush head and apply any kind of toothpaste. To avoid
splashing, guide the brush head to your teeth before switching on
the appliance (picture 2). When brushing your teeth with one of the
Oral-B oscillating-rotating brush heads guide the brush head
slowly from tooth to tooth, spending a few seconds on each tooth
surface (picture 5).
With any brush head start brushing the outsides, then the insides
and finally the chewing surfaces. Brush all four quadrants of your
mouth equally.
You may also consult your dentist or dental hygienist about the right
technique for you.
In the first days of using any electric toothbrush, your gums may
bleed slightly. In general, bleeding should stop after a few days.
Should it persist after 2 weeks, please consult your dentist or dental
hygienist. If you have sensitive teeth and/or gums, Oral-B recom-
mends using the «Sensitive» mode (optional in combination with an
Oral-B «Sensitive» brush head).
Brushing modes (depending on model)
1- 2-
mode modes
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
Your toothbrush automatically starts in the «Daily Clean» mode.
To switch to other modes, successively press the on/off button
(picture 6). Switch off the toothbrush by holding the on/off button
until the motor stops.
Note: You can set/advance the mode functionality via Oral-B
Professional Timer
A short stuttering sound at 30-second intervals reminds you to
brush all four quadrants of your mouth equally (picture 4). A long
stuttering sound indicates the end of the professionally
recommended 2-minute brushing time.
If the toothbrush is turned off during brushing, the elapsed
brushing time will be memorised for 30 seconds. When pausing
longer than 30 seconds the timer resets.
Note: You can set/advance the timer functionality via Oral-B
Pressure sensor
If too much pressure is applied, the pressure sensor light (b) will
light up in red, notifying you to reduce pressure. In addition the
pulsation of the brush head will stop and the oscillation movement
of the brush head will be reduced (during «Daily Clean», «Pro
Clean» and «Sensitive» mode) (picture 3).
Periodically check the operation of the pressure sensor by pressing
moderately on the brush head during use.

Brush heads

Oral-B offers you a variety of different Oral-B brush heads that fit
your Oral-B toothbrush handle.
Most Oral-B brush heads feature light blue INDICATOR® bristles to
help you monitor brush head replacement need. With thorough
brushing, twice a day for two minutes, the blue color will fade
halfway approximately within 3 months, indicating the need to
exchange your brush head. If the bristles splay before the color
recedes, you may exert too much pressure on teeth and gums.
We do not recommend using the Oral-B «FlossAction» or Oral-B
«3D White» brush head with braces. You may use the Oral-B «Ortho»
brush head, specifically designed to clean around braces and
wires.
Connecting your toothbrush to your
Smartphone
The Oral-B TM
Android operating systems. It can be downloaded for free from App
(SM)
Store or Google Play™.
The Oral-B™ App gives you the opportunity to chart your brushing
progress and customize your toothbrush settings (for many more
benefits see the Oral-B™ App instructions).
• Start the Oral-B™ App. It will guide you through the entire
Bluetooth pairing procedure.
Note: Oral-B™ App functionality is limited if Bluetooth wireless
technology is deactivated on your smartphone (for directions
please refer to your smartphone's user manual).
• Once the app asks you, please activate Bluetooth by lifting the
toothbrush off the plugged-in charger (g) or briefly turning your
toothbrush on and off (c). It automatically connects to the
Oral-B™ App.
• Any app instructions will be displayed on your smartphone.
8
3- 4-
modes modes
✓ ✓ ✓
Oral-B Sensi Ultrathin brush head
features a combination of regular bristles to clean
teeth surfaces and ultrathin bristles for a gentle
brushing experience on the gumline.
App is available for mobile devices running iOS or
5-
modes
✓
✓ ✓
Brushing modes
(for handle type 3767)
Daily Clean –
Standard for daily mouth
cleaning
Pro Clean –
For an extraordinary clean
feeling (operated with a
higher frequency)
–
Sensitive
Gentle, yet thorough
cleaning for sensitive areas
Whitening –
Exceptional polishing for
occasional or everyday use
Gum Care –
Gentle massage of gums
TM
App.
TM
App.