Eurotops 40864 Mode D'emploi page 18

P 8550 / A5
Host keys function:
Wave Button Function:
When the dial on the left
1. Vertical long Press 5 seconds: enter into setting menu(menu 1-6), after finish adjustment, vertical long press 5
seconds to save and exit.
2. Short pull up:Increasing parameter values after enter into the menu setting.
3. Short pull down: Decreasing parameter values after enter into menu setting.
4. Vertical Short press: Increasing menu values after enter into menu setting.
5. Long pull down: turn on or off the alarm sound.
E. HUD SETTINGS:
1) Speed error
Since HUD displays datas receive the satellites from GPS, GPS datas will
be a little different with car dashboard datas.At that time,you can enter
into menu setting to have a fine adjustment of HUD in order to get the
same datas as dashboard. If you find there is something different with
the the dashboard values, please make an adjustment.
Vertically long press in the wave button for 5 seconds to enter into the
menu setting.
Default value is 107.
Turn up or down the wave button to increase/decrease parameter value (from 80 to 120).
After adjustment, vertical long press 5 seconds to save and exit.
2) Set the Over-speed Alarm
Vertically long press in the wave button for 5 seconds to enter into the
menu setting.
Short press vertically in the wave button 1 time.
Default value is 150. That means if your speed reach 150km/h the alarm
will starts.
Turn up or down the wave button to increase/decrease parameter value
(from 10 to 180km/h).
After adjustment, vertical long press 5 seconds to save and exit.
3) Turn on and off the buzzer:
Long pull down the wave button 5 seconds to turn off the buzzer, another 5 seconds to turn on the buzzer.