Toshiba Camileo Pro HD Mode D'emploi page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
Troubleshooting
When using the camcorder:
Problem
The camcorder can not be
powered on normally.
The camcorder is still
powered on, but the LCD
screen does not display.
Can not take pictures or
video clips when pressing the
Shutter or Record button.
The LCD screen displays
"MEMORY ERROR" or
"CARD ERROR" message.
Or the camcorder cannot
read the memory card.
Cause
The battery is out of power.
The battery is incorrectly
installed.
If the camcorder stays idle
over one minute, the LCD
screen will automatically
shut down to save power.
Out of memory.
The camcorder is recharging
the flash strobe.
Using a "protected" SD card.
The format of the memory
card is not compatible with
the camcorder.
The memory card is
corrupted.
Solution
Replace the battery.
Re-install the battery.
Press any button except
the power button to
reactivate the display.
Free some space from
the SD/MMC card or the
internal memory.
Wait until the flash strobe
is fully charged.
Set the SD card to be
writable.
Use the camcorder
"Format" function to format
the card.
Replace the memory card
with a new one.
21

Publicité

Table des Matières
loading

Table des Matières