Environmental Protection - Ryobi R18ALU Traduction Des Instructions Originales

WARNING
damage due to a short circuit, never immerse your
as seawater, certain industrial chemicals, and bleach
or bleach containing products, etc., can cause a short
circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
advice.
KNOW YOUR PRODUCT
See page 60.
1. J hook
2. USB port with dust cover
3.
the light off by pressing a third time.)
4. Battery port
MAINTENANCE
parts. Use of any other parts may create a hazard or
cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
Do not attempt to modify the product or create
accessories not recommended for use with the product
by the manufacturer.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging
environmental-friendly recycling.
SYMBOLS
Safety Alert
2 | English
should be sorted for
Ukrainian mark of conformity
before starting the product.
be disposed of with household waste.
retailer for recycling advice.
SYMBOLS IN THIS MANUAL
Note
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
DANGER
Indicates an imminently hazardous situation, which, if not
WARNING
Indicates a potentially hazardous situation, which, if not
CAUTION
Indicates a potentially hazardous situation, which, if not
CAUTION
may result in property damage.