Intended Use - Ryobi R18ALU Traduction Des Instructions Originales

Safety, performance, and dependability have been given
top priority in the design of your area light.

INTENDED USE

The area light is designed for general illumination of most
work area spaces.
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
AREA LIGHT SAFETY WARNINGS
Know your product. Read operator's manual
carefully. Learn its applications and limitations,
as well as the specific potential hazards related to
this product. Following this rule will reduce the risk of
Do not permit children to use work light. It is not
a toy.
The product is not designed to operate in wet or
damp conditions.
If wrapped or in contact with fabrics, the work
light lens can produce sufficient heat to melt some
fabrics.
the work light lens to come in contact with anything.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
Do not place the product or their batteries near
fire or heat. This will reduce the risk of explosion and
To reduce the risk of personal injury and electric
shock, the product should not be played with or
placed where small children can reach it.
To reduce the risk of electric shock, do not expose
to water or rain.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also to prevent misuse of the product and possible
Do not direct the light beam at persons or animals
and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may
Use only with recommended battery pack and
charger. Any attempt to use another battery pack
will cause damage to the product and could possibly
Do not disassemble the product.
Do not store the product in a damp or wet location,
or in a location where the temperature may reach
or exceed 40°C (104°F). For example, inside sheds,
vehicles, or metal buildings in the summer.
The product is non-dimmable; do not connect with
any dimmers.
Check damaged parts. Before further use of the
product, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Do not use the product if
it does not function properly.
Have the product repaired by a qualified person.
The product is in accordance with the relevant safety
requirements. Repairs should only be carried out by
qualified person using original spare parts, otherwise
this may result in considerable danger to the user.
The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminaire shall be replaced.
BATTERY SAFETY WARNINGS
Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.
Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged
dropped or damaged battery immediately.
Do not charge product battery in a damp or wet
location. Following this rule will reduce the risk of
electric shock.
For best results, your battery should be charged
in a location where the temperature is more than
10°C but less than 38°C. Do not store outside or in
vehicles.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
battery may cause irritation or burns.
Do not incinerate the battery even if it is severely
damaged. The batteries can explode in a fire.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
English | 1