DURAVIT SensoWash 254459 Série Instructions De Montage page 11

Cold water
Water pressure 0.07 – 0.75 MPa
Water hardness max. 2.4 mmol/l
> Install a water water softener with
water hardness ≥ 2.4 mmol/l (≥ 14° dH
and/or 24° fH).
DANGER
Health risk and potential
product damage
> Supply the shower toilet with cold drinking
water from the main water system.
> Do not connect any waste water, grey
water, industrial water, sea water or other
untreated or semi-treated water.
+
Shutting off the water supply
11 50
NOTICE
Avoiding water damage
> Shut off the water supply prior to the water
installation.
+
Pushing the water hose through the
13 47
ductwork into the front-wall element
NOTICE
Avoiding any malfunctions
> Only use the reinforced water hose from the
installation kit.
DN 10 (⅜")
(0.7 – 7.5 bar)
56918_MAL_SeWa_WWC+Montageset#100691_100730/19.11.5
11