Jimmy JV63 Mode D'emploi page 17

Trouble Shooting
Please check the following issues before sending to designated repair offices.
Symptoms
Machine not working
Machine stops working
during use
Brushroll stops running
during use
Machine drops from
strong to normal mode
automatically
Suction drops
Charging indicators red
and green light flickers
alternately during charging
Short working time after
charging
Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine
must be repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.
Possible Causes
Battery has no power
Metal tube, electric floor
had, is not assembled
correctly to the vacuum
cleaner
Main motor temperature
overheat and activates
temperature protection
Floorhead
overloaded(Such as
working on carpet, too
much hair entangled
around brushroll)
Cyclone system is blocked
and activates main motor
over speed protection
Dust cup full
Filter blocked
Floorhead air path blocked
contact to machine or
power socket
Machine not fully charged
Battery old aging
Solutions
Charge the vacuum cleaner
Check the accessories are
assembled correctly to the
vacuum cleaner
machine for 5 to 10 minutes
Check whether cyclone
systems needs cleaning
machine for 5 to 10 minutes
whether brushroll needs
cleaning
Clean dust cup and cyclone
system
Clean dust cup and cyclone
Clean or replace filter
Clean floorhead air path
Replug charger to machine
and power socket
Follow instruction manual to
fully charge the battery
Replace battery
15