Jimmy JV63 Mode D'emploi page 14

Cleaning Electric Brushroll
Take out brushroll to clean brushroll.
1.Push brushroll release button, brushroll will automatically bump out.
2. Take out one side of the brushroll in the same direction as shown on the picture, then
brushrollcan be taken out to clean.
3.After cleaning and replacing, reassemble it in opposite sequence.
Storage of Vacuum Cleaner
Disassemble electric floor head and metal tube
When store or clean the vacuum cleaner, if you need to disassemble the electric floor head,
press the electric floor head release button, pull upwards the metal tube.
Floorhead release button
12
Brushroll release button
1.Push brushroll release button
2.Take out brushroll