Viking MR 4082 Manuel D'utilisation page 103

● Allow the engine to fully cool down.
● Remove the mowing deck. (
Detaching the engine cover
Danger of pinching!
Before detaching the cutting height
adjustment rod, ensure that no
body parts (hands, fingers, feet,
etc.) are positioned directly under
the mowing deck.
Remove retaining pin (1) on the right-hand
side of rear mowing deck mounting (4).
Detach cutting height adjustment rod (3)
from rear mowing deck mounting (4).
0478 193 9902 A - EN
13.1)
Loosen screws (5) until they turn freely.
Safeguard against loss!
The screws cannot be removed
when unscrewed.
Folding up the engine cover
Risk of injury!
Always fold the cover up fully to the
stop so that the catch engages in
the frame. This prevents the engine
cover from falling shut
unintentionally.
Fold engine cover (6) up to the stop.
Ensure that catch (7) engages correctly in
the frame.
Closing the engine cover
Danger of pinching!
Ensure that no body parts can be
pinched before closing.
Close the cover slowly and
carefully.
101