RDM PRO 70007 Notice D'utilisation page 11

d) Do not abuse the cable. Never use the
cable to carry, lift or unplug the power
tool. Keep the cable away from heat, oil,
sharp edges or moving parts. Damaged
or tangled cables increase the risk of
electric shock.
e) When operating a power tool outdoors,
use a cable extension suitable for
outdoor use. The use of a cable extension
suitable for outdoor use reduces the risk
of electric shock.
f) If the use of a tool in a damp place is
unavoidable, use a power protected by
a residual cutting device (RCD). The use
of an RCD reduces the risk of electric
shock.
3. Personal security
a) Be alert, monitor what you are doing and
use common sense when operating
a power tool. Do not use a power tool
when you are tired or under the influence
of drugs, alcohol or medication. A
moment of distraction while operating
power tools can cause serious personal
injury.
b) Use personal safety equipment. Always
wear eye protection. The use for
appropriate conditions of a safety
equipment such as dust mask, non-
slippery shoes, helmet, or hearing
protection will reduce personal injuries.
c) Avoid accidental starting. Make sure the
switch is in the "open" position before
connecting to the mains and / or battery,
picking up or transporting the tool.
Carrying power tools with your finger
on the switch or plugging in power tools
that have the switch in the "closed"
position causes accidents.
d) Remove any wrench or adjustment tool
before starting the power tool. A wrench
or tool attached to a rotating part of a
power tool can cause personal injury.
e) Do not overdo it. Keep your feet firmly on
the ground and keep your balance at all
times. This allows a better control of the
power tool in unexpected situations.
f) View properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be
caught in moving parts.
g) If there are devices for the connection of
extraction and dust collection means,
make sure that they are connected and
used correctly. The use of these devices
can reduce the risks related to dust.
4. Utilization and care of power tools
a) Do not force the power tool. Use the
correct electric tool for your application.
The right electrical tool will do the job
better and safer at the rate for which it
was designed.
b) Do not use the power tool if the switch
does not turn "closed" and "open". Any
power tool that can not be controlled
with the switch is dangerous and must
be repaired.
c) Unplug the plug from the power supply
and / or the battery before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the tool accidentally.
d) Store inactive power tools out of the reach
of children and do not allow handling
of the power tool to persons unfamiliar
with the tools or with these instructions.
Power tools are dangerous in the hands
of untrained users.
e) Keep the power tools. Check that moving
parts are not misaligned or locked,
that there are no broken parts or other
conditions that may affect the operation
of power tools. Power tools are repaired
before use, when they are damaged.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Cutting tools maintained correctly with
sharp cutting edges are less prone to
jam and easier to control.
g) Use the power tool, accessories and
tool tips, etc. In accordance with these
instructions and taking into account the
working conditions and the work to be
developed. The use of the power tool for
applications other than those envisaged
could cause a hazardous situation.
5. Technical service
a) Have your power tool checked by a
qualified repair service using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.