REV 0046800 Notice D'utilisation page 13

Table des Matières

Publicité

Display for comfort zone
The comfort zone results from the temperature and the humidity and reflects the room climate.
Display
COMF
WET
DRY
No display
Display for temperature, humidity and trend
Shortly after the installation of the device the indoor temperature and humidity are shown as
digital and bar display respectively. These values can be shown for each channel and for the
location of the device by pushing the button "Channel/Search" (5). It is also possible to adjust a
rotating display (change every 10 seconds) between the channels and the main station, which is
indicated by the symbol "
The trend display shows a constant process at the beginning (horizontal arrow) and varies during
a temperature change of more than 1°C (and 2°F respectively) per hour to a rising or falling arrow.
Display
Temperature trend
Humidity trend
Adjustment of temperature display (°C or °F)
Push button "C/F" (13) to toggle between the temperature display in °C and °F.
Snooze/Light/Sound
Alarm repetition: Push button „Snooze/Light" (10) during an alarm.
Backlight: Push button „Snooze/Light" (10) in normal mode, if the device is used with an adaptor.
Temperature range
20°C til 25°C
(60°F til 77°F)
-5°C til +50°C
(23°F til 122°F)
-5°C til +50°C
(23°F bis 122°F)
Less than 20°C
(68°F) or more than
25°C (77°F)
".
rising
rising
Humidity range
40% til 70%
over 70%
under 40%
40% til 70%
constant
constant
Note for
Ideal ratio of
temperature and
humidity
Humidity too high
Environment too
dry
Not applicable
falling
falling
12

Publicité

Table des Matières
loading

Produits Connexes pour REV 0046800

Table des Matières