Télécharger Imprimer la page

Introduction; Support; Safety Guidelines - ETRONIX PULSE EX3GPRO Manuel D'instructions

Publicité

Les langues disponibles

Les langues disponibles

1. Introduction

Thank you for choosing the Etronix 3 Channel 2.4GHz Frequency Hopping Spread
Spectrum (FHSS) digital proportional system for use in RC cars, boats and other
surface models. Please read and understand this instruction manual then retain it for
future reference.

2. Support

If you encounter any problems in use, please refer to this manual in the first instance.
If you cannot resolve your problem using the information provided in this manual,
please contact your local distributor or get in contact with us using our website:
www.etronix-rc.com

3. Safety Guidelines

This radio system is designed for use in high quality radio-controlled models. To
ensure your safety and that of other people around you, please follow these guidelines
carefully.
1. Always follow local laws or regulations regarding the operation of radio-controlled
models.
2. Always turn on the transmitter first, followed by the receiver. When finished, turn off
the receiver first followed by the transmitter.
3. Please do not attempt to modify this product. Etronix cannot be held responsible
for any damage that might occur to the product as a result of an unauthorised modifi-
cation.
4. Please make sure the batteries in the transmitter and those used to power the re-
ceiver have sufficient power before using your model. Using batteries with insufficient
power will reduce the range of the radio and may result in a loss of control.
5. Make sure that any servos and/or ESC are securely connected to the receiver at all
times.
6. Please keep the radio system away from moisture, heat, fire and sources of elec-
tronic interference at all times.
7. Please do not make any adjustments to transmitter settings while the model is in
motion. Always wait until the model is standing still before making any adjustments
to the transmitter settings.
8. The low voltage warning will activate when the battery in the transmitter is below
4.4v. The LED on the transmitter will flash blue and will be accompanied by a beeping
sound. Please stop using your model immediately if the low voltage warning activates
to prevent loss of control.
9. Etronix will not be held liable or responsible for any damages caused by the opera-
tion of your radio-controlled model.
2

Publicité

Chapitres

loading