Ebode IPV4NVR Guide De Démarrage Rapide page 5

3. Login
1. After the NVR starts up successfully, the Power indicator LED should be green. The
startup page is displayed on the screen.
2. Login page. Enter Username and Password, then click Login button. Default username is
admin with no password.
Default username is
admin with no password
3. For the initial log in, the system will pop up a message for modifying the
username/password. Click OK button.
1. Input the new username, new
password and confirm password.
4. After modifying the username/password, enter the Setup Wizard interface.
3-12-2014
2. Click OK
- 5 - ebode IPV4NVR