Ebode IPV4NVR Guide De Démarrage Rapide page 11

Check DDNS
6.2 Access to the NVR in LAN
There are two ways to access to the NVR via the browser in LAN.
 Open the IP Camera Tool program in the resource CD. It will display the NVR's IP address
and port in your LAN. Double click the NVR list here, and your default browser will open up
to the login page.
 You can also access to your NVR by http://IP address:HTTP port via the browser. eg,
http://172.16.0.127:88
6.3 Access to the NVR in WAN
If UPnP has been enabled in the router, you do not need to perform the following steps. If
UPnP is disabled, you need to select one of the following methods to configure port
forwarding on your router. For these steps, we will be using the TP-LINK brand wireless
router as an example.
 If there is a UPnP function in your router.
Choose "Forwarding > UPnP", make sure that the Current UPnP Status is Enabled.
3-12-2014
Click Save
- 11 -
Check
Enable
DDNS
ebode IPV4NVR