Weelko F334 Mode D'emploi page 10

FAQ
Skin scrubber
The probe suddenly stops emitting:
•
If the probe is separated from the skin, it will stop
emitting after 5 seconds. This is a safety feature and
should not be mistaken for a system fault.
•
Touch the skin with the probe and it will start
emitting again after 5 seconds.
Diamond dermabrasion
If the suction effect is reduced:
•
Replace the metal and foam filters.
MAINTENANCE
Skin scrubber
•
Any oil on the probe must be removed immediately.
•
After use, please clean the probe and keep it probe.
Store it in the probe-protecting sleeve at all time.
•
Store the probe carefully to avoid damaging it.
Diamond dermabrasion
•
The foam filter in the handle needs to be changed
after every 5 treatments. Dismantle the handle and
replace the filter. Then reassemble the handle.
•
The metal filter in the handle needs to be changed
after every 5 treatments. Dismantle the handle and
replace the filter. Then reassemble the handle.
•
Clean and sterilize the diamond heads after every
treatment.