Setting Up Your Youth Activator; Device Controls - ILUMINAGE YOUTH ACTIVATOR Mode D'emploi

USING YOUR
YOUTH ACTIVATOR FOR
THE FIRST TIME
4
NEED HELP? Please visit us at
http://www.iluminagebeauty.co.uk
or call +44 (0) 2033 020 606 (UK)

SETTING UP YOUR YOUTH ACTIVATOR

1. Unpack the device and USB cord.
2. Remove the back cover of the device and remove the
battery tab underneath it.
3. Connect the USB cable to the charging port at the
bottom of the device and plug the other end into any
certified USB charging source.
4. A green battery indicator will blink to indicate the
device battery is charging.
5. Keep it plugged in and charge for up to 4 hours or
until the battery light indicator is steady green.
6. The device is now ready for use. Unplug the USB
cable from the device and remove the treatment cap to
prepare the device for treatment.
YOUTH ACTIVATOR DEVICE CONTROLS
The YOUTH ACTIVATOR has a treatment indicator that
appears on the front of the device, above the on/off
button. It also has a battery indicator near the USB
charging port.
The device indicators provide the following information:
TREATMENT INDICATOR LIGHT
Steady Blue The device has been activated and
Light ready for treatment
1 Blue Light – Device is on LOW
treatment setting
2 Blue Lights – Device is on HIGH
treatment setting
Flashing Blue Device error. Refer to Troubleshooting
Light Table for resolution.
No light The device is off
15