Wood's Venezia G Mode D'emploi page 3

Safety Instructions
Warning
Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
l
The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an
l
operating gas appliance or an operating electric heater.)
Do not pierce or burn.
l
Be aware that refrigerants may not contain an odour.
l
Appliance shall be installed, operated and stored in a room with a floor area larger than 14.4 m
l
Keep any required ventilation openings clear of obstruction.
l
Servicing shall be performed only as recommended by the manufacturer.
l
The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for
l
operation.
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from
l
an industry-accredited assessment authority, which authorises their competence to handle refrigerants safely in accordance
with an industry recognised assessment specification.
Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the
l
assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of
flammable refrigerants.
All working procedure that affects safety means shall only be carried by competent persons.
l
Be careful not to bump when moving to avoid leakage in the refrigeration line.
l
Flammable material.This Refer operators Read technical Read operators
appliance contains R290/ manual manual manual
Propane aflammable
refrigerant
The maximum dosage of refrigerant is 260g.
Notes:
The air conditioning is only suitable for indoor use, and is not suitable for other applications.
l
Follow local grid interconnection rules while installing the air conditioning and ensure that it is properly grounded. If you
l
have any question on electrical installation, follow the instructions of the manufacturer, and if necessary, ask a professional
electrician to install it.
Place the machine in a flat and dry place and keep a distance of above 30 cm between the machine and the surrounding
l
objects or walls.
After the air conditioning is installed, ensure that the power plug is intact and firmly plugged into the power outlet, and
l
place the power cord orderly to prevent someone from being tripped or pulling out the plug.
Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and outlet free from
l
2
.