Preliminary Remarks - Onda OVS Notice D'utilisation

This Operating Instructions book must be kept in good conditions and in a place easily accessible
from the assigned personnel.
• This Operating Instructions book does not relieve of respecting the laws in force regarding
safety and accident - prevention rules.
• ONDA S.p.A. DECLINES ALL RESPONSABILITY in case of:
 Inadequate use of the pressure equipment;
 modifications to the pressure equipment;
 breach of laws in force regarding safety and accident - prevention;

default of what written in this Operating Instructions book.
The Oil Separators, installed on the discharge line of the compressors, are used to separate the
lubrificant oil from the refrigerant and reducing the circulating quantity in the circuit and therefore
improving the final performance.
The Oil Separators are made of carbon steel.
Refrigerants
The usable refrigerants are: HCFC, HFC, NH
construction.
Before any operation on the Oil Separator make sure the delivered equipment is what you have
ordered, verifying the correctness of the name plate.
The model, the serial number of the Oil Separator, the year of construction, the maximum
allowable pressure and temperature and the usable fluids are written on the name plate.
SERIAL NUMBER
For any communication to ONDA S.p.A. we recommend you to report us always the serial number
written in the position as in the figure. The serial number, in fact, identifies
equipment and allows a faster search for all the information you might need.
3.1 Documents
The Heat exchanger is always provided with this Operating Instructions book.

1. PRELIMINARY REMARKS

2. INTRODUCTION
3. MATERIAL INSPECTION
MODEL
and others unless compatible with the material of
3
11
definitely
your own