Display Modes; Data Logging; Battery Mode Operation - AKO CAMRegis 15740 Mode D'emploi

Operation

Display modes

There are four possible modes for displaying instantaneous input readings. Press P or O to toggle between the
various modes:
Individual input information
Input
reading
Description
of the input
List of inputs
Description
of the input
Input disabled
Input reading
*
Alarm status
R Alarm activated ( Alarm signal activated
< Maximum alarm = Minimum alarm

Data logging

The logged data are saved in log blocks, each log block saves a given period of time depending on the "Log
interval" parameter, as shown:
Log interval
5 min.
Log interval
15 min.
Log interval
30 min.
If any change is made in the configuration that affects the parameters indicated on page 22, the ongoing block is
closed and a new one is started with the new configuration.

Battery mode operation

In the event of a power failure, the device continues to log all inputs for 6 hours, but deactivates the display and
printing of data to minimise consumption.
** According to parameter "Log start day"
Alarm
status*
Alarm
status*
> Alarm signal muted/disabled
Digital input activation
Start
00:00
Start
Monday 00:00**
Start
Monday 00:00**
18
Sequential input information
Input
reading
Description
of the input
Summary of inputs
(only AKO-15740/AKO-15742)
Input No.
Probe failure
Input disabled
Input reading
Err Probe error
Log block
24 hours
Log block
1 week
Log block
2 weeks
1575H031 Ed.04
End
23:59
End
Sunday 23:59**
End
Sunday 23:59**