Technical Data - Lenze L−force 9400 Série Instructions De Montage

3

Technical data

3 Technical data
The standards, operating conditions and rated data correspond to the ones of
the standard device for which the installation backplane is intended.
Assignment of installation backplane ˘ standard device
Axis controller type
E94ASxE0024
E94ASxE0034
E94ASxE0044
E94ASxE0074
E94ASxE0134
E94ASxE0174
E94ASxE0244
1)
)
Note!
The devices must be installed in housings (e.g. control cabinets) to
meet applicable regulations.
42
Installation
backplane type
E94AZPS0034
E94AZPS0074
E94AZPS0244
The busbar mounting set with fuse is available as an accessory. It is required when
Single Drives are operated in DC−bus connection via the DC busbar.
Busbar mounting set /
1)
fuse
E94AZJA003/
EFSAR0016ARHN
E94AZJA007/
EFSAR0040ARHN
E94AZJA024/
EFSAR0100ARHN
(tightening torque:
3.4 Nm (30lb−in))
l
Device size
I
II
III
EDK94ZPS113 DE/EN/FR/ES/IT 6.0