Durabase L65F246X3C Mode D'emploi page 40

use the Media Browser screen to access and play
shared network iles.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with a wired
connection for higher playback quality.
To conigure wired settings please refer to the
Network Settings section in the Settings menu.
• You might be able to connect your TV to your LAN
depending on your network's coniguration. In such
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
Coniguring Wired Device Settings
Network Type
The Network type can be selected as Wired or Wireless,
in accordance with the active connection to the TV set.
Select this as "Wired" if you are connecting via an
ethernet.
Coniguration Status
This section displays the status of the connection.
IP Address
If an active connection is available, the IP address will
be displayed on this section. If you want to conigure an
IP address preferences, press the GREEN button and
switch to the advanced mode.
Coniguring Wired Network Settings in
Advanced Mode
After pressing the GREEN button, the "Advanced
mode" will be available. While in Advanced Mode,
press the RED button to edit settings. When inished,
press OK to save, Press RETURN/BACK to cancel.
Wireless Connectivity
To Connect to a Wireless Network
• To make your modem's SSID visible, you should
change your SSID settings via the modem's
software. The TV cannot connect to the networks
with a hidden SSID.
To Connect to a wireless LAN, you should perform
the following steps:
1. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
2. To conigure your wireless settings please refer
to the Network settings section in this manual.
• A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed
Wireless LAN
to increase bandwidth. These are optimized for
adaptor
smoother and faster HD video streaming, file
transfers and wireless gaming.
USB inputs
rear left side
• Use a LAN connection for quicker file sharing
of the TV
between other devices like computers.
• The frequency and channel differ depending on the area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the coniguration of these
products, the radio wave conditions, the line trafic
and the products that you use. The transmission may
also be cut off or may get disconnected depending
on the radio wave conditions, DECT phones or any
other WiFi 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless feature of the TV supports 802.11 a,b,g
& n type modems. It is highly recommended that you
should use the IEEE 802.11n communication protocol
in order to avoid any possible problems while watching
videos.
• You must change your modem's SSID when there are
any other modems around with the same SSID. You
can encounter connection problems otherwise. Use
a wired connection if you experience problems with a
wireless connection.
Coniguring Wireless Device Settings
Open the Network Settings menu and select Network
Type as Wireless Device to start connection process.
Press the YELLOW button to scan the wireless
networks. A list of available networks will be displayed.
Please select your desired network from the list.
Note: If the modem supports N mode, you should set
N mode settings.
If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via the navigation
buttons and the OK button on the remote control.
Wait until the IP address is shown on the screen.
English - 39 -
Broadband
ISP
connection