Durabase L65F246X3C Mode D'emploi page 35

CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Other Settings menu
under Settings menu should be set as Enabled
at irst. Press the Source button and select the
HDMI input of the connected CEC device from the
Source List menu. When new CEC source device
is connected, it will be listed in source menu with
its own name instead of the connected HDMI ports
name(DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source
has been selected.
To terminate this operation and control the TV
via the remote again, press and hold the "0-Zero"
button on the remote control for 3 seconds. Or
press Q.Menu button on the remote, highlight the
CEC RC Passthrough and set as Off by pressing
Left or Right button. This feature can also be
enabled or disabled under the Settings/Other
Settings menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to
replace other cables between the TV and the audio
system (A/V receiver or speaker system).
When ARC is active, TV does not mute its other
audio outputs automatically. So you need to
decrease TV volume to zero manually, if you want
to hear audio from connected audio device only
(same as other optical or co-axial digital audio
outputs). If you want to change connected device's
volume level, you should select that device from
the source list. In that case volume control keys are
directed to connected audio device.
English - 34 -