Maintenance And Cleaning; Technical Data - aquanique PGL Set 1 LED Notice D'emploi

- EN -

Maintenance and cleaning

N O T E
Do not use any chemical cleaning agents as they are harmful to plants, animals and the environment.
• Ensure that no moisture can enter the unit.
• Never clean the device using a pressure washer.
• If necessary, clean with clear water using a soft brush.
Replacing the plastic disc
• Only use Aquanique plastic discs.
How to proceed:
 D
1. Undo the bayonet catch on the threaded ring, remove the threaded ring.
– Turn counter-clockwise.
2. Remove the plastic disc and O-ring, replace the plastic disc.
– When replacing the disc, ensure that the O-ring is correctly positioned.
3. Reassemble the unit in the reverse order.
Disposal
N O T E
Do not dispose of this unit with domestic waste.
• Render the unit unusable beforehand by cutting the cables and dispose of the unit via the return system
provided for this purpose.

Technical data

Description
Transformer Mains connection voltage
Mains frequency
Max. power consumption
Output voltage
Max. output current
Protection type
Length of power connection cable
Dimensions
Weight
LED spotlight Mains voltage
Max. power consumption
Protection type
Colour temperature (warm white)
Beam angle
Max. immersion depth
Permissible water tempera-
ture
Length of connection cable to transformer
Length of connecting cable between two LED spotlights
Dimensions
Weight
12
Length
Width
Height
Operation under water
Operation out of the water
Diameter
Height
PGL Set 1 LED
V AC 230 ... 240
Hz 50
W 1.5
V AC 12
VA 4
IP 44
m 2
mm 70
mm 42
mm 58
kg 0.4
V AC 12
W 0.5
IP 68
K 3000
° 30
m 1
°C +4 ... +35
°C -10 ... +40
m 3
m –
mm 57
mm 77
kg 0.25
PGL Set 3 LED
230 ... 240
50
2.0
12
4
IP 44
2
70
42
58
0.4
12
3 × 0.5
IP 68
3000
30
1
+4 ... +35
-10 ... +40
3
2
57
77
0.65