aquanique PGL Set 1 LED Notice D'emploi page 10

- EN -
Safety information
Electrical connection
• Electrical installations must meet the national regulations and may only be carried out by a qualified electrician.
• A person is regarded as a qualified electrician if, due to his/her vocational education, knowledge and experience, he
or she is capable of and authorised to judge and carry out the work commissioned to him/her. This also includes the
recognition of possible hazards and the adherence to the pertinent regional and national standards, rules and regula-
tions.
• Switch off all units in the aquarium or disconnect the power plugs of all units before reaching into the water.
• For your own safety, please consult a qualified electrician.
• Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use (splash-proof).
• Install the transformer at a minimum safety distance of 2 m from the water.
• Protect the plug connection from moisture.
• Only connect the unit to a correctly fitted socket.
Safe operation
• Route cables such that they are protected from damage and do not present a tripping hazard.
• Never carry or pull the unit by the electrical cable.
• Never operate the unit if an electrical cable is defective!
• Never carry out technical changes to the unit.
• Only open the unit housing or its attendant components if this is explicitly specified in the operating instructions.
• Only carry out work on the unit that is described in this manual. If problems cannot be overcome, please contact an
authorised customer service point or, if in doubt, the manufacturer.
• Only use original spare parts and accessories for the unit.
• Only operate the unit with the supplied transformer.
• The power pack or transformer and plug connections are only protected from rain and splash water, they are not
waterproof. Ensure that they are never placed in water.
Information about these operating instructions
You made a good choice with the purchase of this product PGL Set 1 LED / Set 3 LED.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Warnings used in these instructions
The warning information is categorised by signal words, which indicate the extent of the hazard.
C A U T I O N
Indicates a possibly dangerous situation, which could lead to medium or minor injuries, if not avoided.
N O T E
Indicates a possibly dangerous situation, which could lead to damage to property or the environment, if not
avoided.
Cross-references used in these instructions
 A reference to a figure, e.g. figure A.
→ Reference to another section.
10