Attach Chimney Mounting Bracket - Bosch DKE96 Mode D'emploi

4) Attach Chimney Mounting
Bracket
5) Hang the Hood
in screw holes so that they are flush with the wall.Note: At least one screw must
be installed through a stud. Leave a 3/8" (6 mm) of each screw exposed.
chimney screw holes
upper hood screw holes
lower hood screw holes
Attach spacers to holes on chimney mounting bracket arms, as seen in "Attach
Mounting Brackets" on page 5.
Attach chimney mounting bracket to wall through chimney screw holes created in
previous step. Use two screws.
Place the hood by sliding the mounting holes in the top of the hood over the top
hood screws. Check and adjust for level. Tighten the screws.
centerline
template
30" min.
Prepare Wall
Figure 3:
Attach Mounting Brackets
Figure 4:
English 5