Setting The Suction Time; Vacuum Packing Food; Safety Cut-Out; Auto-Standby - Buffalo CC770 Mode D'emploi

Masquer les pouces Voir aussi pour CC770:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Telephone Helpline: 0845 146 2887 (United Kingdom)

Setting the Suction Time

Press and hold the STOP
1.
Note: The default value is 90 seconds (CC771 is 95 seconds).
Note: Each unit is equal to 10 seconds (e.g. 4 equals 40 seconds). A period after the
value (e.g. '4.') indicates an increment of five seconds for more accurate timing.
To adjust the sealing time, press and hold the
2.
the display. Maximum programmable time is 90 seconds.
Press and hold the STOP
3.
WARNING: Constantly using excessive suction times time will shorten the operational
life of the appliance.

Vacuum Packing Food

Place the food inside in the bag and remove any
1.
excess liquid or food residue.
Lift the lid of the appliance. The lid will lock in place
2.
once lifted high enough.
Place the open end of the bag over the channel.
3.
Lower the lid and press down gently to start the
4.
suction process. Maintain a firm pressure on the lid for
best results.
Note: The process can be stopped at any time by pressing the STOP
CC771 Only - The pressure within the bag is displayed before the sealing countdown begins.
5.
Once the programmed suction time is reached the sealing process begins.
6.
'E' flashes on the display ('END' on CC771) when the appliance has finished sealing the bag. Lift the lid
7.
by the sides and remove the bag.
WARNING: Never lift the lid from underneath. The sealing bar remains hot.
Note: The lid may be hard to open for a few seconds after operation due to vacuum
pressure. Allow the pressure to dissipate for the lid to open freely.

Safety Cut-out

This appliance is fitted with an automatic safety system to help prevent any damage from misuse.
If during suction the pressure gets too great (no air left in the bag), the appliance automatically switches
to the sealing process.

Auto-Standby

The appliance will revert to standby mode if it is not used for a period of 4½ minutes.
button for two seconds. The default suction time flashes on the display.
or
button to save the suction time and exit. The Sealing time is displayed.
buttons until the required time is shown on
UK
button.
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cc771

Table des Matières