Télécharger Imprimer la page

Siemens RVP200 Mode D'emploi page 3

Masquer les pouces Voir aussi pour RVP200:

Publicité

Les langues disponibles

Les langues disponibles

Energy-efficient heating with
the RVP200/210 heating controller
Operating Instructions
You want to switch the heating on
1. Is the plant ready to operate? Check the mains
switch.
2. Check the time of day and – with the 7-day time
switch – the weekday. Make readjustments, if neces-
sary (refer to the following section).
3. Move the operating mode selector to the required
mode.
You want to set the clock
The switching dial may only be turned clockwise, never
anti-clockwise!
1. First, make a coarse setting:
Turn the switching dial slowly in clockwise direction
until the current time of day reaches the time indicator
(with the 7-day dial, also observe the weekday).
2. Now make the correct setting:
Turn the large hand until the time of day is correct.
Tip: The change from wintertime to summertime, and vice
versa, must be made manually.
You want to heat in automatic mode
The controller has two
modes:
Auto
Automatic changeover between NORMAL tem-
perature and heating control OFF according to
the 24-hour program.
Auto
Automatic changeover between NORMAL and
REDUCED temperature according to the 24-hour
program.
You want no heating for a certain period
of time
Move the operating mode selector to
switched off, but ready to operate.
Only with the RVP210: Select either
for control switched off, or
automatic d.h.w. heating and control switched off
Tip: Frost protection is ensured in all operating modes.
Meaning of LED «Override»
-
«Override» flashes: A fault has occurred – refer to the
section covering operational faults
-
«Override» steady on: Controller is controlled by the
room unit. The settings used are those made on the
room unit. There is no fault
You want to heat continuously
-
No setback: Select operating mode
-
Continuous setback: Select operating mode
Tip: Do not forget to reset the operating mode!
Your rooms are too cold or too warm
Especially in mild weather:
Readjust the room temperature with setting knob
point represents a room temperature change of 2 °C.
. The control is
. One

Publicité

loading

Ce manuel est également adapté pour:

Rvp210