Seat Height - HAIDER BIOSWING 780 Mode D'emploi

Seat Height

1
Adjust the height of the seat surface according to the height to the hollow
parts of your knees. Your upper and lower leg form a right to slightly open
angle. Your feet are flat on the floor – without pressure on the upper thighs.
Lowering the Seat
While sitting on the chair, pull the operating element
it at the desired position. Please pay attention to the risk of getting trapped
in the foot section.
Raising the Seat
Lightening the load on the seat, pull the operating element
release it at the desired position.
1
upward and release
1
upward and
1
english | 16
Adjustment of Seat Tilt
To support the physically correct tilt of the pelvis, you can adjust the seat sur-
face either by utilizing the permanent-contact mechanism or by adjusting it
for individually desired inclination. The seat tilt facilitates the straightening
of the spinal column.
Seat Tilt with Permanent-contact Mechanism
While sitting on the chair, press the operating element
and then downward. The whole seat surface reclines according to the shift
of your body weight and the position of your upper leg. To deactivate the
setting, pull the operating element upward again.
Individually Adjusted Seat Tilt
While sitting, push the operating element
the required tilt by shifting your body weight and upper leg. Then release
the operating element when complete.
2
toward the front
2
toward the front and adjust
2
english | 17
2