Velleman CAMCOLMS4 Mode D'emploi page 4

 Protect this device from shocks and abuse. Avoid brute force
when operating the device.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
 Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 body
2 zoom dial
3 turret
4 objectives
5 slide clips
6 base LED
7 specimen stage
5. Battery
Do not puncture batteries or throw them in fire as
they may explode. Do not attempt to recharge
non-rechargeable batteries (alkaline). Dispose of
batteries in accordance with local regulations. Keep
1. Open the battery compartment.
2. Install three fresh AA batteries following the polarity markings inside
the compartment.
3. Close the battery compartment.
4. Remove the batteries from the device when not in use.
V. 02 – 07/12/2017
CAMCOLMS4
WARNING
batteries away from children.
4
8 base
9 arm
10 focusing knob
11 reflective LED
12 storage drawer
13 LED on-off switch
©Velleman nv